PURELAB CHORUS 2+ RO/DI/UV 20L/HR SYSTEM WITH BOOST PUMP

SKU
PC220DUBPM1

Description

Flexible. Configurable. Simple.

One complete solution for the laboratory

PURELAB Chorus 2+ (RO/DI/UV) provides tap to 15 MΩ.cm pure water for laboratories requiring up to
100 liters per day and is able to fully recirculate to maintain 15 MΩ.cm.

The PURELAB Chorus 2+ provides additional bacteria and inorganic quality for sensitive analytical and life
science applications above that of basic laboratory work. With its simple design and ease of use, water can
be dispensed from the system or from a choice of additional Halo Dispensers.

Fully Recirculating

In addition to simple composite vent filtration, the PURELAB Chorus 2+ is the only fully recirculating Type II+ pure water system on the market, maintaining consistent peak water purity at 15MΩ.cm.


Configuration

Ability to configure multiple systems to increase flow rate and save space through stackable solutions that can be wall mounted, on or under the bench.Simplicity
Simple to install, operate and maintain, with a clear indication of water purity. It is also simple to replace consumables, reducing maintenance time.

Data Capture

Data capture via USB for system performance validation and software updates. Dispense Choose from three different Halo Dispense solutions to allow additional dispense points, even in adjacent labs.

Conductivity

<2000 µS/cm

Temperature

1-35 °C

System Voltage

24V DC

Part Number

PC220DUBPM1

Technologies

185/254 nm UV, Deionization, Pre-treatment, Reverse Osmosis

Silica

<2 ppm

Organics (TOC)

< 30 ppb

Particles

>99% rejection

Power Consumption

60 VA (without boost pump)

Footnotes

Standard conditions are 4 bar inlet pressure at 15oC, fed with potable water and a clean pre-treatment cartridge. Refer to flow tables outside these conditions. ◊ With POU filter fitted

Breite (mm)

376

Brand Name Range

PURELAB

Carbon Dioxide

<0.1 ppm

Total Chlorine

0.5 ppm

Daily Usage (8hr day)

> 100 l/day

Applications

Buffer and media preparation, Electrochemistry, Feed to ultra pure water systems, General chemistry, Spectrophotometry

Höhe (mm)

679

Inorganics

>10 MΩ-cm

Installation Options

Bench

Mains Input

100-240V ac, 50-60 Hz

Make-Up Rate

60 l/hr

Max. Pressure

6 bar (90 psi)

Min. Pressure

4 bar (60 psi) without internal boost pump

Noise Level

<45 dBA

Drain (gravity fall with air gap)

80 l/hr

Endotoxins

N/A

Footnotes

Standard conditions are 4 bar inlet pressure at 15oC, fed with potable water and a clean pre-treatment cartridge. Refer to flow tables outside these conditions. ◊ With POU filter fitted

Feedwater Nature

Potable supply (Tap Water)

Flow Rate

<130 l/hr

Fouling Index

<10

Free Chlorine

<0.05 ppm

Ships within

4 weeks

Betriebs-Gewicht (kg)

530

Shipping Depth

340mm

© 2022 Veolia Water Technologies. All Rights Reserved.